We restore the marble you already own — floors, shower walls, vanities, and kitchen countertops — to a finish that looks better than the day it was installed. Dull, etched, scratched, or stained: it's a service problem, and we're the specialists who fix it.
1997
Serving Raleigh Since
5.0
Across Review Platforms
1–2
Days Most Projects
100
NC Counties Served
Short answers to the questions Raleigh homeowners ask us most. Full detail is further down the page, and you can read more about marble floor polishing or marble countertop polishing specifically.
Marble polishing is the mechanical process of removing the damaged surface layer of the stone and rebuilding the shine — either a high-gloss reflective finish or a smooth satin hone. It is a restoration service, not a cleaning service.
Yes. Dullness, scratching, etching, and traffic wear all sit in the top layer of the marble, so they can be polished out. Replacement is almost never necessary and restoring the original stone preserves veining that new material can't match.
Yes — we polish and restore marble on floors, shower walls, bathroom walls, vanities, kitchen islands, and countertops. Countertops and vanities are restored in place, with no slab removal or plumbing disconnection, and are often finished in a single day.
Cost depends on square footage, condition, finish level, and access. Because of that, we quote from an on-site inspection rather than a phone estimate. The assessment and written estimate are free, with no obligation, and usually delivered within 24 hours.
Marble is softer and more acid-sensitive than granite or quartz, so it requires a specialist rather than a generalist. Look for a company that works on marble exclusively, that has been in business long enough to have a track record, and that quotes from an on-site inspection. We've been restoring stone since 1997 and are headquartered in Raleigh.
Marble doesn't wear out — it gets damaged on the surface. Every problem below is fixable, and none of them require new stone.
Problem 01 — Floor Polishing
The most common complaint we hear in Raleigh: a marble floor that used to gleam now looks flat and washed out no matter how often it's cleaned. Foot traffic, grit tracked in from outside, and years of the wrong cleaners have abraded the top layer of the stone. Cleaners can't bring it back because the problem isn't dirt — it's the surface itself.
What our service does:
We mechanically abrade the damaged layer back to sound stone and rebuild the finish across the entire floor — so it's even, not patched. Foyers, hallways, kitchens, bathrooms, and stairs.
Problem 02 — Countertop Polishing
Those pale, matte-looking marks around the sink and on the island aren't stains — they're etching, caused by acid eating into the calcium carbonate in the marble. Lemon juice, vinegar, wine, soda, and several popular household cleaners all do it. Wiping harder makes it worse. Etching is also the number one reason homeowners are told they need new countertops.
What our service does:
We remove the etched layer and restore the finish with the countertop still in place — no slab removal, no plumbing disconnection, no weeks waiting on fabrication. Most kitchens and vanities are done in a single day.
Problem 03 — Shower & Wall Marble
Marble showers are the hardest-working stone in the house. Hard water leaves mineral deposits that bond to the surface, soap scum builds a film that dulls the polish, and any product containing acid etches the walls a little more every week. The result is a shower that looks perpetually dirty even when it's spotless — and in many Raleigh homes the marble is beautiful underneath.
What our service does:
We remove mineral and soap buildup, restore the polish on walls, floors, thresholds, and benches, then seal the surface against moisture so it stays cleaner between services.
Problem 04 — Cracks, Chips & Stains
A dropped pan nicks a countertop edge. A heavy object cracks a floor tile. Oil, wine, or a rusted can leaves a mark that no cleaner touches. Homeowners often assume these mean replacement — but cracks, chips, and most staining are repairable, and the repair blends into the surrounding stone so you'd never know it happened.
What our service does:
We repair cracks and chips with color-matched material, remove staining through professional-grade processes, and finish the area so it matches the rest of the surface — then seal it.
One specialist team for every marble surface in your Raleigh home or business — honed to a satin matte or polished to a mirror gloss.
Foyers, hallways, kitchens, bathrooms, stairs, and commercial floors. We remove dullness, scratches, etching, and traffic patterns across the whole surface so the finish is consistent from wall to wall.
Shower walls, floors, thresholds, benches, and vanities. We strip mineral deposits and soap film, remove etching, restore the polish, and seal so hard water and soap have less to cling to.
Kitchen islands, perimeter counters, bathroom vanities, bar tops, and table tops. We remove acid etching and restore the finish with the slab in place — no removal, no plumbing work, no fabrication delays.
Replacing marble means demolition, disposal, new material, and installation labor — plus weeks of disruption and a slab that will never match your original veining. Restoring it avoids all of that. This is the only thing we do, and we've been doing it since 1997.
Your marble's veining and patterning came out of the ground once. New stone can't replicate it, and a partial replacement never matches the rest of the floor.
We work in place. Countertops stay connected, cabinets stay put, plumbing stays intact, and most residential projects are finished in one to two days.
Marble is softer and more acid-sensitive than granite or quartz. It requires different abrasives, different chemistry, and a controlled hand. That's the whole job for us.
Spot treatments leave visible halos and transition lines. We work the full surface so the sheen and clarity are consistent across every square foot.
You'll know exactly what to expect before we start, and there's no obligation at any step.
01
We walk every surface with you, identify the type of damage — dullness, etching, scratching, or staining — and confirm whether polishing, repair, sealing, or a combination is the right fix.
02
You receive a detailed written estimate — usually within 24 hours — based on square footage, condition, finish level, and access. No pressure, no hidden line items, no upsell.
03
We protect your space, then work the stone in place. Floors, showers, walls, and countertops stay where they are — no demolition, no removal, no waiting on fabrication.
04
We don't call a project finished until you've walked it with us. We seal the restored surface against future staining and etching, then show you how to protect the finish.
Free
On-Site Assessment
Residential & commercial
24 hrs
Written Estimate
Detailed, itemized, no obligation
Since 1997
Restoring Stone
Headquartered in Raleigh
Raleigh's marble spans nearly a century of architecture — from 1920s-era homes with original stone to brand-new builds and high-traffic commercial lobbies. Each one needs a different approach, and we've worked on all of them.
Older & Historic Homes
Original marble in established neighborhoods that has dulled over decades and deserves careful, character-preserving restoration.
Modern & New Construction
Carrara, Calacatta, and Statuario floors, islands, and vanities that have already lost their factory polish.
Commercial & Hospitality
Hotels, restaurants, offices, retail, banks, and medical buildings. We can work evenings or weekends to protect your operations.
Property Managers & Real Estate
Turnovers, pre-listing prep, and multi-unit portfolios. Restored marble photographs better and removes a buyer objection entirely.
We quote from an on-site inspection, not a phone guess. Four things drive the number:
Square footage — total surface area to be worked.
Condition — light dullness versus deep etching, scratching, or lippage.
Finish level — a high-gloss polish takes more passes than a satin hone.
Access — stairs, tight bathrooms, cabinet masking, and furniture handling.
Every project starts with a free, no-obligation on-site assessment and a written estimate, usually within 24 hours.
1-888-282-6244We provide marble polishing and restoration to every neighborhood in Raleigh and the surrounding Triangle communities.
01
02
03
We're not a franchise routing your job to a subcontractor. Our team works out of Raleigh and travels across Wake County and the Triangle daily. If you're anywhere in the region, we come to you.
Don't see your area? We cover all of Wake County and beyond — and our service spans North Carolina, South Carolina, and Virginia. See our statewide marble polishing services, full service area list, or marble restoration details.
Answers to the most common questions Raleigh homeowners ask about marble floor and countertop polishing.
Last updated · Reviewed by The Marble and Grout Guys stone restoration team, Raleigh NC
One call gets a free on-site assessment from a local Raleigh marble restoration team. Floors, walls, showers, countertops, vanities — we restore it all without replacing a single slab.